#1
|
|||
|
|||
Re-fretting a carbon fiber guitar (Rainsong)
Is it the same process as a wood guitar? Any advice or tips you can give that would be different from re-fretting a wood guitar?
__________________
AGF rules say I must tell you that I'm a KoAloha Ukulele sponsored artist. |
#2
|
|||
|
|||
I did a Rainsong refret fairly recently. It was a PIA, but I can't fully remember the details. All frets will likely need gluing afterwards. The frets come out fairly easily.
__________________
---- Ned Milburn NSDCC Master Artisan Dartmouth, Nova Scotia |
#3
|
|||
|
|||
Did you use heat to pull the frets?
__________________
AGF rules say I must tell you that I'm a KoAloha Ukulele sponsored artist. |
#4
|
|||
|
|||
I used heat on some frets to start. I don't think I used heat for all frets.
__________________
---- Ned Milburn NSDCC Master Artisan Dartmouth, Nova Scotia |