#1
|
|||
|
|||
4 channel mixer
suggestions on a 4 channel mixer to use with a fishman soloamp. want to run 2 guitars and two vocals.
|
#2
|
|||
|
|||
I use a Yamaha MG82cx for that very purpose. Works great--noiseless, compact, and inexpensive. Love it.
|
#3
|
||||
|
||||
I've been quite happy with a used Behringer 1202FX that I picked up on GC's site for 50.00. More than 4 channels, but for the price, you never know when you will need more!
I've had a couple of these now and they seem to be a good value.
__________________
"One small heart, and a great big soul that's driving" |
#4
|
|||
|
|||
There are lots of choices, and they're all likely to do the basic job just fine, but one that stands out a little in the very small mixer world is the Allen and Heath ZED10 or ZED10FX. In addition to just being well made and well designed, they have semi-parametric midrange EQ, which can really be useful for amplifying an acoustic guitar. They also have high-z 1/4" inputs on two channels, which can save you having to go through a DI--although that's only an advantage if you know you'll be near the board on stage (as I think your questions suggests you will).
It has 2 more XLR channels, but if you don't need effects there is also the Soundcraft EPM6 (again with semi-parametric mid EQ). On the other hand, if you're already using a preamp/DI with adequate mid-EQ, this might not matter. Louis |
#5
|
|||
|
|||
I used to use (and still have!) a Mackie 1202VLZ mixer... quite comprehensive, plenty of different functions and options, quiet... and it was cheap, back in the 90's! If you could find one of these, used, it shouldn't run you more than $150 or so... it has 4 XLR/1/4" inputs, as well as 4 stereo "line level" inputs (for the total of 12...).
__________________
"Home is where I hang my hat, but home is so much more than that. Home is where the ones and the things I hold dear are near... And I always find my way back home." "Home" (working title) J.S, Sherman |
#6
|
|||
|
|||
great sound, size and options
Allen and Heath ZED10FX
|
#7
|
|||
|
|||
+1 on the Allen and Heath. Has a very good reverb too.
|
#8
|
|||
|
|||
I really think you should choose the mixer based upon your own usage preferences and intuition.
I have been using Mackie mixers for live and studio work for about 20 years. I understand the signal routing well, I love the EQ section, and I can generally get around them and troubleshoot them easily. The 16 channel mixer that I use for my band is a Mackie Onyx series, and I love it. There are plenty of other people who don't love them. I have an Allen and Heath Zed 10 that I use for solo gigs. It does the job, but I don't love it. The signal path through the mixer is foreign to me, I don't like the sound of the pre-amps or EQ section, the on-board effects sound like garbage to my ears, and it seems to have a lot less dynamic range/ headroom than I'm used to. Overall it just feels like a toy compared to my Mackie. So I would go look at a few, and pick the one that is most intuitive to you. If I were in your shoes, I would find a nice used Mackie 1202 VLZ and an outboard effects unit from Lexicon or TC Electronics; however, your own preferences would likely be different from mine.
__________________
1943 Gibson J-45 Martin Custom Shop 000-28 Authentic Aged 1937 Voyage Air VAOM-4 IBG Epiphone J-200 Aged Antique |
#9
|
|||
|
|||
huh?
I sold my pretty good Mackie for the A & H. How the effects could be described as "garbage" is beyond me. Wish it had channel mutes but it is a really nice mixer with very good sound.
|
#10
|
|||
|
|||
Quote:
I also don't see what's wrong with the effects on the 10FX. I'm not a big fan of the design they used for tweaking the parameters, but the effects themselves sound just fine to me (at least for my purposes--adding a little reverb for small acoustic and semi-acoustic gigs). Louis |
#11
|
|||
|
|||
Low budget option is the Peavey PV-6. $99 and gets favorable reviews.
|
#12
|
|||
|
|||
generally, very good
I agree with your experience here. Could you expand on what yoyu mean by "I'm not a big fan of the design they used for tweaking the parameters" ?
|
#13
|
|||
|
|||
Quote:
I've had the 1202FX and currently use a 1002FX for my solo gigs (which has plenty of inputs for the two guitars and two mics but only has EQ and gain on two channels, if that makes a difference to you). Anyway, I've always been perfectly happy with both sound quality and durability. Just about the only Behringer gear I would still buy. |
#14
|
|||
|
|||
Quote:
As I said, I have no problem with the effects on the ZED, but the way you have to push those little buttons and work with the number of little lights is just a bit awkward (relatively speaking), and you have less subtle control over the parameters, given that you only have one parameter control for each effect and the parameter (or the connected set of parameters) is preselected for you. Louis |
#15
|
|||
|
|||
I'm using a Soundcraft Notepad 124FX and it's perfect for your application. It's all about the preamps and the Notepad has four XLR preamps. The same high quality XLR's that are used on the big boys. Check out reviews.
|