#31
|
|||
|
|||
Hopefully you don't NEED to be an electrical engineer to appreciate this article:
http://www.premierguitar.com/article...riven-to-tears I use the Maxon OD808 Tubescreamer clone, which replaced a failed Ibanez TS9, which replaced a previous TS9...
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#32
|
|||
|
|||
Quote:
Sent from my SM-G920V using Tapatalk
__________________
"You don't have to be great to start, but you have to start to be great." -Zig Ziglar Acoustics 2013 Guild F30 Standard 2012 Yamaha LL16 2007 Seagull S12 1991 Yairi DY 50 Electrics Epiphone Les Paul Standard Fender Am. Standard Telecaster Gibson ES-335 Gibson Firebird |
#33
|
|||
|
|||
BTW, A Tube Screamer would fit in the soft clipper category of that taxonomy.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#34
|
|||
|
|||
I pulled out my old Roland VG-8 modeler, and swear it still sounds better than the VG-88 and VG-99. Roland modeled a couple overdrive pedals, and I easy control the amount of gain with an external foot pedal.
|