#1
|
|||
|
|||
Humbucker on an Emerald?
Because there isn’t traditional soundhole on the Emeralds, is there a way to get a humbucker installed in it somehow?
__________________
AGF rules say I must tell you that I'm a KoAloha Ukulele sponsored artist. |
#2
|
|||
|
|||
Seems it would have to be real thin PU mounted just like it was on a solid body? But I certainly am not qualified to know if that would work. Never tried it.
__________________
John |
#3
|
|||
|
|||
Someone has done this in the past--maybe Kramster. I recall seeing photos.
|
#4
|
||||
|
||||
I also recall seeing an example of an Emerald with one installed. Inquire with Sean @ Emerald about it. I’m sure it’s possible.
__________________
Tom '21 Martin D-18 Standard | '02 Taylor 814c | '18 Taylor 214ceDLX | '18 Taylor 150e-12 | '78 Ibanez Dread (First acoustic) | '08 CA Cargo | '02 Fender Strat American '57 RI My original songs |
#5
|
|||
|
|||
I don’t own an Emerald and can’t say for sure, but the Lace Ultra Thin HB pickup should fit. It’s been used on a Journey OF660 (see that thread a few days ago). Can’t imagine an Emerald wouldn’t accomodate the Lace.
|
#6
|
|||
|
|||
I did put a Sunrise in my Cargo... had to cut out for it... only works in an earliest model as newer ones have a V brace... a Lace would be easiest .
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#7
|
||||
|
||||
There’s this example. Also, I recall seeing one with a pickup mounted right at the end of the neck. Looked great in that position.
__________________
Tom '21 Martin D-18 Standard | '02 Taylor 814c | '18 Taylor 214ceDLX | '18 Taylor 150e-12 | '78 Ibanez Dread (First acoustic) | '08 CA Cargo | '02 Fender Strat American '57 RI My original songs |
#8
|
|||
|
|||
Interesting... is it a bit trebly that far down I wonder.
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#9
|
|||
|
|||
The idea of a thin pickup that was surface mounted was just discussed a month ago, then revived a couple of days ago in this OF660 thread:
http://www.acousticguitarforum.com/f...d.php?t=488183 |
#10
|
|||
|
|||
I ageee the pickup should be mounted close to the neck. With the Lace and some double-sided tape, I imagine you could try out different locations.
|
#11
|
|||
|
|||
|
#12
|
|||
|
|||
Quote:
Wow, they cut out the top to mount these pickups? Interesting. Are you the owner of this instrument?
__________________
AGF rules say I must tell you that I'm a KoAloha Ukulele sponsored artist. |
#13
|
|||
|
|||
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#14
|
|||
|
|||
Sorry everyone, I guess I need to brush up on my online searching skills.i just discovered that the Emerald Custom Portfolio has quite a bit of mag pickup installations on record with tons of photos. Appreciate all the help.
http://emeraldguitars.com/custom-gui...531a35cc61#x20
__________________
AGF rules say I must tell you that I'm a KoAloha Ukulele sponsored artist. |
#15
|
|||
|
|||
No it was made for Jamie Dupuis.
Quote:
Regarding magnetic P/Us, I prefer them because I wanna be LOUD! Better than sliced wheat bread with cold turkey and miracle whip... Good luck in your quest for amplified tone. I recommend the following concert at high volumes. |