#1
|
|||
|
|||
Baggs Lyric Re-install
I'm going to put in a previously installed Baggs Lyric in one of my guitars. Any suggestions on what to use in place of the original adhesive (pads), that are no longer usable after pulling the p/u out?
Thanks, David |
#2
|
|||
|
|||
If you contact Baggs, they'll send you replacements.
|
#3
|
|||
|
|||
Thanks, I'll contact them. Anyone else find an aftermarket pad that works?
|
#4
|
|||
|
|||
I used the double sided tape that is used to hang pictures or mailboxes. I bought it at the dollar store, that could work wile LR Baggs send you a replacement.
__________________
2006 Gibson Hummingbird 2007 Gibson J-45 Elite Mystic Rosewood LR Baggs Anthem, Venue, Session, and a few Strymon Effects |
#5
|
|||
|
|||
Yeah, I would honestly contact them. Both Baggs and Fishman have sent me replacement adhesive, battery bags, clips etc within a week of contacting them. I am sure you could easily find the adhesive they use at any hardware store. You could probably even ask them and they would tell you what they use.
|
#6
|
|||
|
|||
I think once, in a pinch, I used some simple double-sided foam tape cut to size. But I called emailed Baggs and they sent me a handful of pre-cut pieces for both the Lyric and the controller. I want to say they came in less than a week. It was pretty impressive.
|
#7
|
|||
|
|||
Thanks all. I have sent a message to Baggs.
|
#8
|
|||
|
|||
I just received two sets of mic and volume adhesives, and wire clips for free. LR Baggs rocks!!
__________________
2006 Gibson Hummingbird 2007 Gibson J-45 Elite Mystic Rosewood LR Baggs Anthem, Venue, Session, and a few Strymon Effects |