#1
|
||||
|
||||
How many reverbs do you use in a mix?
My recordings are mostly acoustic guitars, harmonica, vocals, and percussion. I mix in the box and I generally use a long and a short Lexicon reverb on aux sends as my primary verbs in any given mix. Then I may use a third reverb such as an Abbey Road plate or an Eventide for a specific effect on an instrument.
I generally compress and eq my reverbs to help them sit in the mix. On my primary vocal verb I'll cut around 3K and roll off the low bass and high treble. I've heard of folks giving each instrument a different reverb but find that I prefer it sounding as though the instruments share a common space. What kinds of reverbs are you folks using on your guitars and vocals and how do you apply them to your mixes? |
#2
|
|||
|
|||
I'm currently using two reverbs:
The TAL Reverb 4 on almost everything for a vintage sense of space. https://tal-software.com/products/tal-reverb-4 The Valhalla Plate on strings where that wet sound is cool (like dobro). https://valhalladsp.com/shop/reverb/valhalla-plate/
__________________
Website: http://www.buzzardwhiskey.com |
#3
|
|||
|
|||
The old-school way was to use sends and stereo returns because your all-hardware studio probably only had one or two reverb units. I started out doing that ITB, too, but over time it's less and less.
Partly because I'm using more delays and fewer reverbs generally. Partly because each element's reverb might sound best with a specific decay time or predelay or hf rolloff or what have you. And partly because I've grown fond of panning an element's reverb in the same direction as the dry element. I've never been big on compressing or eq'ing the sends or returns, but maybe I should be. |
#4
|
||||
|
||||
Quote:
I should use delays more than I do. Especially when you consider how easy it is to time a delay to the tempo of a recording using your DAW. |
#5
|
|||
|
|||
Increasingly I use only 1 aux channel but I vary the amount of referral from the original channels.
I always use it on vocals (carefully) but not always on guitar. Valhalla Room mostly.
__________________
------ AJ Lucas Pavilion Sweep fan fret Santa Cruz OM/E (European Pre War) Martin J40 |
#6
|
|||
|
|||
Quote:
I don't generally calculate delay times, just earball it. Seems to me that sometimes when you get it exactly on the note value, it kinda disappears. |
#7
|
|||
|
|||
I typically setup 2 reverbs: a longer one & shorter one (or bigger space & smaller space). So the "bigger" 'verb pushes things back in the mix while the "shorter" one keeps them forward.
Been using H-Reverb and the stock eVerb in Digital Performer. I tried them all and found these 2 to give me what I want with the least fuss. I EQ my reverbs depending on their purpose and am a fan of some ducking compression to keep everything tidy.
__________________
-Steve 1927 Martin 00-21 1986 Fender Strat 1987 Ibanez RG560 1988 Fender Fretless J Bass 1991 Washburn HB-35s 1995 Taylor 812ce 1996 Taylor 510c (custom) 1996 Taylor 422-R (Limited Edition) 1997 Taylor 810-WMB (Limited Edition) 1998 Taylor 912c (Custom) 2019 Fender Tele |
#8
|
|||
|
|||
For electric guitars I like to use a Boss Fender Reverb pedal. For acoustic guitars and drums I really like the gold plate patch on the Lexicon PCM 91.
__________________
http://acousticcountryblues.com/ |
#9
|
|||
|
|||
I tend to go light on reverbs. I may just be me, but most of the time when I can hear reverb on something I think it's too much
I'll use good old-fashioned amplifier spring reverb on electric guitar sometimes, but with moderation. I've got an Eventide stereo delay plug-in I'll use, or even the simple reverb plug in that comes with Focusrite Scarlet interfaces. I have an older Lexicon rack mount unit I used to use more than I do now. I'll use a plate reverb plug in on vocal or drums tracks sometimes. There an Izotope plate reverb plug in on my mixing/mastering system as well as one in Adobe Audition. Delays I use a whole lot of. Everything from just a touch of short time, few repeats with high frequency roll off on vocals, to outrageous ones based off some of the Logic Pro delay presets. With the exception of that electric guitar amp reverb, I almost never "print" reverb. It's always added when mixing.
__________________
----------------------------------- Creator of The Parlando Project Guitars: 20th Century Seagull S6-12, S6 Folk, Seagull M6; '00 Guild JF30-12, '01 Martin 00-15, '16 Martin 000-17, '07 Parkwood PW510, Epiphone Biscuit resonator, Merlin Dulcimer, and various electric guitars, basses.... |
#10
|
||||
|
||||
I generally use one, a Bricasti M7 hardware unit. I set it up as an insert on it's own Aux track and send to it
__________________
Enjoy the Journey.... Kev... KevWind at Soundcloud KevWind at YouYube https://www.youtube.com/playlist?lis...EZxkPKyieOTgRD System : Studio system Avid Carbon interface , PT Ultimate 2023.12 -Mid 2020 iMac 27" 3.8GHz 8-core i7 10th Gen ,, Ventura 13.2.1 Mobile MBP M1 Pro , PT Ultimate 2023.12 Sonoma 14.4 |
#11
|
|||
|
|||
I have a template that has 6 various reverb sends on it, ranging from ambience to a long hall, a couple plates, etc.
But I don't usually use much and have evolved toward primarily using delays. With delays I find they generally clutter up the mix less plus it's possible to create greater front to back depth. |
#12
|
|||
|
|||
Two, one longer, one shorter.
sends and returns Regards, Ty Ford |
#13
|
|||
|
|||
I set up reverb busses (actually my Reaper template that I use for starting new projects has everything set up already).
I have one bus for vocals, one for instruments and one for drums, and I use pre-fader sends from each track to the busses. (Because I use pre-fader sends is why I use separate busses, so there are no artifacts from off tracks). I will use the same IR file for all busses so that they all sound in the same place, but change the pre-delay, longer for the drums, middle length for instruments, shorter for vocals. My favorite 'room' IR is the La Scala Opera House. On the lead vocal, I may use a different IR - a plate, or sometimes a delay. If I use a delay, I may send the lead vocal to the vocal reverb bus, but it depends on the overall mix.
__________________
Mike My music: https://mikebirchmusic.bandcamp.com 2020 Taylor 324ceBE 2017 Taylor 114ce-N 2012 Taylor 310ce 2011 Fender CD140SCE Ibanez 12 string a/e 73(?) Epiphone 6830E 6 string 72 Fender Telecaster Epiphone Dot Studio Epiphone LP Jr Chinese Strat clone Kala baritone ukulele Seagull 'Merlin' Washburn Mandolin Luna 'tatoo' a/e ukulele antique banjolin Squire J bass |