#1
|
|||
|
|||
Guitar hard to play
Hi guys
I recently bought a new Seagull s6 after seen a ton of recommendations on it. Anyhow, played it in GC, like the sound, like the girth of the neck (I have huge hands), but the strings weren't so easy to fret. I assumed that after sending it to setup and changing strings it will feel better but its still takes a lot of effort to play. I only realized my guitar is super hard to play when I went to a different GC to buy some strings, and I played some low end guilds martins and corts, and most of them felt amazingly easier to play than mine even with super high action. I am playing with 0.12 but I don't think that means I need to kill my fingers to make a sound. Do you guys have any suggestions? |
#2
|
|||
|
|||
I use elixer 11's on all my acoustic guitars. Before I swore by d'addario 11's until I tried a set of elixers and immediately loved the tone and feel. So much easier to play. You could try changing the strings on yours. Might make a difference.
|
#3
|
|||
|
|||
Can you slip a 0.5mm pick or a 0.020" feeler gage between the 1st fret and the string. Is there a gap? If so - take it to a luthier and tell him that the 1st fret action is too high.
Now... I have to say this out loud... Be aware that lowering the action can initially open a can of worms that results in a bunch of additional work you will have to pay for... The high action masks all this stuff... Often that's why the cheap/free "setup" doesn't lower the action... An example.... Expect fret buzz because the frets arent particularly level. This will require a fret level and crown to resolve.. That's often another $150 or so.. |
#4
|
|||
|
|||
Unless the guitar has some defect that prevents it, by definition, it is not setup properly for you.
|
#5
|
|||
|
|||
Sounds like the strings are probably high. The guitar needs setup.
You could have high nut, high bridge, or too much relief (bend) in the neck. Better let someone with experience take a look.
__________________
Breedlove, Landola, a couple of electrics, and a guitar-shaped-object |
#6
|
|||
|
|||
I would take it back or to another QUALIFIED person and have it set up again. Something's not right. If you aren't experiencing the same with all guitar's you play, then the Seagull should be able to play as easily as anything else you play.
|
#7
|
|||
|
|||
Truckjohn above has hit the nail on the head. A good tech should be able to look at the guitar and give a good idea of the end result after setting nut and saddle height after adjusting the neck. If the frets aren't levelled that well fret buzz will raise it's head....but a little fret buzz is acceptable in my book (have a listen to Tommy Emmanuel play his Matons, always hear fret buzz from him as he likes the neck nice and straight as it improves the feel) Be aware, even extremely small adjustments can make a big difference to how the guitar feels, it's why a lot of techs don't quite get things right as they don't fine tune things quite to the level of detail that's required. Good luck!
Sent from my iPhone using Tapatalk |
#8
|
|||
|
|||
+1. the only times i've had this experience are: 1) poor setup (for me) and/or 2) defect, e.g. bridge lift.
__________________
Martin 000-28 Various archtops/electrics |
#9
|
||||
|
||||
Quote:
Quote:
Quote:
Some feel soft like my strat, and some stiff as hell. Quote:
|
#10
|
|||
|
|||
Quote:
Take it to a skilled repair person and he or she will likely be able to get it to play as easily as other guitars you've played. |
#11
|
|||
|
|||
__________________
Martin 000-28 Various archtops/electrics |
#12
|
|||
|
|||
Try checking your set-up - all you need is a capo and 6" rule. If you don't feel confident making the changes, then you should ask someone who does, but I think it's a good thing to learn how to check at least.
There's a bunch of sites which take you through this: here's one I found (no affiliation) With all the usual caveats, if open chords in the first position are tough to fret, it's likely the nut slots are too high. You can check this by putting a capo on the first fret and playing your open chords up one fret (you can down tune half a step if you'd like to fully replicate the string tension). If chords play easy like this, then your nut needs attention. |
#13
|
|||
|
|||
The other thing that has to be said...
Don't compare the setup and feel of an electric guitar to an acoustic. Electric guitars are often setup with super low actions and super thin, slinky strings... You barely touch them to make them go - the amp and pedals do the heavy lifting.... Acoustic guitars on the other hand rely on you to put the power into them.... They need higher action and stiffer strings so you can hear them... That all results in a huch harder feel than an electric.. When you compare your seagull to a martin or taylor - most likely you are feeling the setup as well as the neck profile and fretboard radius... The neck feel has a huge effect on how a guitar feels in your hands... |
#14
|
|||
|
|||
Quote:
__________________
Martin 000-28 Various archtops/electrics |
#15
|
|||
|
|||
Ok thank you very much guys I apreciate it.
I will send it to a pro tech to evaluate it. Another point I forgot to mention - The angel of the strings coming out the bridge is almost flat like maybe 5-10* max... I think it needs to be lifted right? |