#1
|
|||
|
|||
Bone blanks?
Looking for a bone blank 1/2-3/4 inches wide and deep. Length about 4 inches. Does anyone know of a supplier who would have something that large?
Sent from my XT1650 using Tapatalk |
#2
|
|||
|
|||
David Warther should be able to supply those blanks for you.
http://www.guitarpartsandmore.com/ http://www.guitarpartsandmore.com/ma...ddle-Blanks-35
__________________
Martin OM-18 Authentic 1933 VTS (2016) |
#3
|
|||
|
|||
You may have some luck looking at web sites that supply knife scales for the custom knife industry.
|
#4
|
|||
|
|||
I make a lot of my own nuts and saddles out of sterilized bones I get from pet supply stores, and I've never run across any bones that would yield blanks that size... that's a pretty big bone! Most cattle bones range in thickness from about 1/4" to 3/8", maybe thicker in spots, but are irregular, and it would be unusual to find a piece that would yield 1/2"x3/4"x4". You might have to consider laminating pieces together.
Knife handles may be thicker than that, but they are likely hollow on the inside. |