Am i connecting the right way?

[BOOSE]

Hi,
I start with my guitar pluged into an a/b box one (a) into a TC ditto x2 and (b) into a Digitech Trio +, the Ditto goes into two amps and the Trio into a monitor via the mixer out, the Trio works fine but the Ditto makes a huge popping sound every time i clear a loop and a thud when i press to start a loop. Any help would be appreciated.

[Paleolith54]

Originally Posted by BOOSE

Hi,
I start with my guitar pluged into an a/b box one (a) into a TC ditto x2 and (b) into a Digitech Trio +, the Ditto goes into two amps and the Trio into a monitor via the mixer out, the Trio works fine but the Ditto makes a huge popping sound every time i clear a loop and a thud when i press to start a loop. Any help would be appreciated.

I've had such problems in the past using cheaper, passive a\b boxes. I went to a Radial powered unit, and that resolved them. That's just one possibility: how your two amps interact could also be part of it. I assume you've experimented on these signal chains without the a\b box in line? I'd try that too, just to start narrowing things down

[BOOSE]

Thanks for your help, i will try your suggestions, but a new a/b pedal could be the way to go if all else fails.

[MikeBmusic]

Obviously the first thing to check is if the Ditto makes those noises when you plug the guitar straight into it.