|
|
#1
01-01-2015, 11:28 PM
|
|||
|
|||
Guitar Wiring
Hi,
I drew this up and was hoping someone could tell me if it looks workable. The pots are grounded by being bolted to the pick guard shielding. Comments and suggestions welcomed http://www.squier-talk.com/forum/att..._182821225-jpg
__________________
Paully  Yamaha FG700S Dread Epiphone Joe Pass Hollowbody Electric Epiphone Les Paul Special 1 p90's Squier Stratocaster SE Yamaha Thr 5 v.2 Amp Behringer Ultracoustic AT-108 Amp Bugera V5 Infinium Amp Bugera 112 TS Cab Peavey PVi 100 Microphone Tascam DR05 Digital Recorder Cubase AI 6 
|
|
#2
01-02-2015, 08:16 AM
|
|||
|
|||
|
It is still a good idea to solder a ground wire between all the pots, in case they come loose during a performance. Jon
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields
|
|
#3
01-02-2015, 09:31 AM
|
|||
|
|||
|
I'll second running a ground wire. Without one, you're dependent on the pots having a solid mechanical connection to the pickguard for your grounding.
__________________
"You don't have to be great to start, but you have to start to be great." -Zig Ziglar Acoustics 2013 Guild F30 Standard 2012 Yamaha LL16 2007 Seagull S12 1991 Yairi DY 50 Electrics Epiphone Les Paul Standard Fender Am. Standard Telecaster Gibson ES-335 Gibson Firebird
|
