The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 01-28-2010, 08:52 PM
Craig_S Craig_S is offline
Registered User
 
Join Date: Dec 2009
Location: Metropolitan Detroit
Posts: 138
Default Neck Relief

I'm curious. Do you fellows set your necks dead straight or with some relief? I'm pretty good with electric instruments, but I had not owned an acoustic for many years.
__________________
The opinion expressed above is for entertainment purposes only.

My one and only acoustic: Fender CD140SCE
Reply With Quote
  #2  
Old 01-28-2010, 09:07 PM
taylorcc taylorcc is offline
Registered User
 
Join Date: Oct 2005
Location: Cape Cod, Massachusetts, USA
Posts: 1,323
Default

On my guitars which have a truss rod, with the action tweaked to my satisfaction, I straighten the neck (tighten the truss rod) until I get string rattle when playing, then back off until the rattling stops.

Once the relief is set, there will be some seasonal tweaking but it's in tiny amounts - an eighth turn at a time.
__________________

2009 CA Cargo Raw, 2006 Collings OM-1 SS light build, 2004 Taylor 714ce, 2000 Taylor 310K, 1991 Martin HD-28, 1971 Martin 0-18, 1967 Guild F-30

2006 Ovation Legend 6756LX 12 string, 2004 Taylor 354ce 12 string, 1976 Guild G312-NT 12 string (dreadnaught shape)

1966 Martin T-15 tiple, Mele koa ukulele
Reply With Quote
  #3  
Old 01-28-2010, 09:12 PM
hann hann is offline
Registered User
 
Join Date: Nov 2006
Location: Singapore
Posts: 2,423
Default

i like almost no relief.. but i probably do it that same way

but if i've to crank it up too much then I know there's something else wrong with the nut/saddle... then I'll turn my attention to those.
__________________
[SIZE="1"]Presently...:
Boucher SG-51- Dazzo 70/OSS UST
Atkin Essential OM
Reply With Quote
  #4  
Old 01-28-2010, 09:18 PM
Howard Klepper Howard Klepper is offline
Registered User
 
Join Date: May 2008
Location: Earthly Paradise of Northern California
Posts: 6,627
Default

About .004-.005" for me.
__________________
"Still a man hears what he wants to hear, and disregards the rest."
--Paul Simon
Reply With Quote
  #5  
Old 01-28-2010, 09:37 PM
Craig_S Craig_S is offline
Registered User
 
Join Date: Dec 2009
Location: Metropolitan Detroit
Posts: 138
Default

Thank you Mr, Klepper. That's just about where I have it set right now, with a capo at the second fret, fretted at the 17th fret and measured at the 8th fret.

Thanks also to hann and taylorcc.
__________________
The opinion expressed above is for entertainment purposes only.

My one and only acoustic: Fender CD140SCE
Reply With Quote
  #6  
Old 01-29-2010, 01:53 PM
Aaron Smith Aaron Smith is offline
Charter Member
 
Join Date: May 2003
Location: Atlanta, GA
Posts: 3,346
Default

I'm with Howard- .004" is ideal for me. Up to .008" is still pretty playable, beyond that is too much.
__________________

1943 Gibson J-45
Martin Custom Shop 000-28 Authentic Aged 1937
Voyage Air VAOM-4
Reply With Quote
  #7  
Old 01-29-2010, 04:33 PM
Doubleneck Doubleneck is offline
Registered User
 
Join Date: Mar 2005
Location: Ohio
Posts: 6,427
Default

Wow you guys are exact. I like it with very little relief, I just capo on the first, finger the body fret and make sure that string is just barely off the finger board in the middle. Wonder what barely off measures?
Steve
__________________
Steve
2020 McKnight Grand Recording - Cedar Top
2005 McKnight SS Dred
2001 Michael Keller Koa Baby
2014 Godin Inuk
2012 Deering B6 Openback Banjo
2012 Emerald Acoustic Doubleneck
2012 Rainsong JM1000 Black Ice
2009 Wechter Pathmaker 9600 LTD
1982 Yairi D-87 Doubleneck
1987 Ovation Collectors
1993 Ovation Collectors
1967 J-45 Gibson
1974 20th Annivers. Les Paul Custom
Reply With Quote
  #8  
Old 01-29-2010, 04:41 PM
Craig_S Craig_S is offline
Registered User
 
Join Date: Dec 2009
Location: Metropolitan Detroit
Posts: 138
Default

Quote:
Originally Posted by Doubleneck View Post
Wonder what barely off measures?
Around four or five thousandths (.004-.005), probably. That would be just barely over the thickness of a piece of average notebook paper.
__________________
The opinion expressed above is for entertainment purposes only.

My one and only acoustic: Fender CD140SCE
Reply With Quote
  #9  
Old 01-29-2010, 05:59 PM
GBS GBS is offline
Registered User
 
Join Date: Aug 2008
Posts: 451
Default

That's interesting. I'm doing some work on a guitar saddle and the rest of the setup now, and I note that Taylor recommends .010 as their relief! Actually, I've found that to be pretty good if you are doing figerpicking with slide work. Using picks, and whether your tuning is down below std. or not all seem to have a big influence, also. And don't forget, that even though you aren't supposed to set action with the truss rod, there can be some significant interplay between that and relief!
Reply With Quote
  #10  
Old 01-29-2010, 06:10 PM
hann hann is offline
Registered User
 
Join Date: Nov 2006
Location: Singapore
Posts: 2,423
Default

i used to be quite technical with relief.. till i got tired of having to fret here and there and slide the gauges in and out

I just keep it as flat as I can without buzz on heavy strumming.. then after that happens, i'll work on the nut/saddle. Of course with my blind eye I just spot some light coming between the strings..
__________________
[SIZE="1"]Presently...:
Boucher SG-51- Dazzo 70/OSS UST
Atkin Essential OM
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools





All times are GMT -6. The time now is 02:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=