#1
|
|||
|
|||
SOLD 2013 Taylor Custom Dreadnought (Short Scale Dread) SOLD
Selling my 2013 Taylor Custom Dreadnought (Short-Scale Dreadnought). I am the orignal owner and only selling to make room for something else.
This Custom DN has an Adirondack top, Mahogany Back & Sides, and Adirondack bracing. Nut width is 1-3/4" with a scale length of 24-7/8". This also has Taylor's "V" shaped neck which I find extermely comfortable, something you typically don't see on a Taylor. This guitar is very comfortable and easy to play no doubt due to the shorter scale and neck profile. Plenty of headroom for hard strumming but also very responsive for fingerpicking as well. This guitar has a simple but beautiful abalone rosette with faux tortise binding around the soundhole, body, and heel cap. The build sheet is in the images below along with the profile of the neck. No issues other than a small 5MM very shallow ding on the top which I've captured on Sounds clips are located here; https://drive.google.com/drive/folde...usp=drive_link https://flic.kr/s/aHBqjBncxP Last edited by brooks1277; 04-26-2024 at 03:02 PM. |
#2
|
||||
|
||||
Interesting guitar - doesn't list saddle spacing, standard 2 3/16?
__________________
"One small heart, and a great big soul that's driving" |
#3
|
|||
|
|||
Just measured, it’s 2-3/16”.
|
#4
|
|||
|
|||
Monday morning bump.
|
#5
|
|||
|
|||
Tuesday afternoon, bump
|
#6
|
|||
|
|||
Hump day, bump day
|
#7
|
|||
|
|||
Thursday night bump.
|
#8
|
|||
|
|||
Guitar has been sold.
|