Mackie 1202 VLZ3 to ZOOM H2

[jacm81]

I'm going to record a live show off my Mackie board into my Zoom H2. Is the Mackies's RCA TAPE OUTPUT into the Zoom's LINE IN the best option?

http://www.mackie.com/products/1202v...202VLZ3_OM.pdf

http://www.samsontech.com/site_media...ser_manual.pdf

[louparte]

Originally Posted by jalbert1

I'm going to record a live show off my Mackie board into my Zoom H2. Is the Mackies's RCA TAPE OUTPUT into the Zoom's LINE IN the best option?

http://www.mackie.com/products/1202v...202VLZ3_OM.pdf

http://www.samsontech.com/site_media...ser_manual.pdf

I have the same mixer. I use it for mixing on-the-go. It's well-built.
It's taken some falls and not a single problem.

Yes. That's probably your best option if your other OUT's are
routed to the PA or elsewhere.

You have a few choices.

1. Main outputs to Zoom
2. Tape outputs to Zoom
3. Headphone out to Zoom.
4. Alt outputs to Zoom
5. Control Room outputs to Zoom.

#2 may be the best. But someone needs to watch the levels.

[jacm81]

It is pretty dependable. I've been using this one for years, hundreds of shows. Thanks.