#1
|
|||
|
|||
Taylor Pick Guards: Plan B?
I never have really like the factory Taylor pick guard. Any of you guys ever replace it with something else? Got any pix?
__________________
HD-28 Hog GS Mini |
#2
|
||||
|
||||
I like the static cling clear Taylor Pick Guard. If you clean the guitar first and then work the bubbles out, it becomes nearly invisible. You can leave it on as long as you want and take it off whenever you want.
No pics as I can't even get it to show up on them! |
#3
|
|||
|
|||
I love the way the Taylor pickguard compliments the curves of Taylor x14ce model guitars. The Taylor Grand Auditorium CE design, I feel, is one of the most aesthetically-pleasing guitar designs I've ever seen.
To get to your concern, you could remove the factory-installed pickguard and play your Taylor nude or place a static-cling Taylor pickguard on it for easy on/off protection, if needed. As for a permanent other-shaped replacement for the Taylor pickguard, I can't think of anything as nice. Regards, SpruceTop
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#4
|
|||
|
|||
I own several Taylor. None have the Taylor pick guard
I have two sunbursts, one has no guard the other has a greven martin style |
#5
|
|||
|
|||
I like the taylor pick guards.
|
#6
|
|||
|
|||
Quote:
I have a 514ce thanks for any info regard Mike |
#7
|
|||
|
|||
No one is really helping the OP.
|
#8
|
|||
|
|||
Quote:
I've never done it but here's a link to a Frets.com article on pickguard removal: http://www.frets.com/FRETSPages/Luth...peelguard.html Regards, SpruceTop
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#9
|
|||
|
|||
Here are some pictures I collected from AGF members over the years who placed non Taylor pickguards on their Taylor guitars.
Also, R. Taylor does a Martin style Pickguard on their Series 3 Dread.
__________________
Liam F. 👽🖖🏼👑 🎶 |
#10
|
|||
|
|||
Thanks a bunch for those images Bill. I was hoping someone had some images of a few Taylors with Grevens on them. I love Greven's and have replaced both factory pick guards on my 000-15 and HD-28 with 50's Grevens. Those images have convinced me that I will be installing a 50's Greven on my new DN8 as well when it arrives next week. Thanks again Bill.
__________________
HD-28 Hog GS Mini |
#11
|
|||
|
|||
Quote:
I would love to see pictures of your DN8 when you get it (so I can add to my growing collection of guitar porn).
__________________
Liam F. 👽🖖🏼👑 🎶 |
#12
|
|||
|
|||
That's because it's sacrilege to change the factory pickguard.
|
#13
|
|||
|
|||
I'm not a fan of taylors guards but they just don't look right with anything else. I say Taylor or naked. (FYI, Taylor now sells all black guards in their standard shape...still a Taylor guard, but a little different at the same time)
|
#14
|
|||
|
|||
Quote:
By all means, continue to read the other advice given. All the best! Bill
__________________
Will |
#15
|
|||
|
|||
Same shape on mine but custom. frank http://i125.photobucket.com/albums/p...1/CIMG0200.jpg
|