#1
|
|||
|
|||
Ensor Guitars- The "All American Wood" Guitar- FINAL PICS & VIDEO
I've been wanting to build this guitar for a LONG time- a guitar built with ALL American woods.
First off let's define "American". Simply put, all from the USA. Not just North American and definitely not South American. I had pitched the client on the idea and he loved it. The only thing he was specific on was that it was different from the mellow tones of his macassar/sinker guitar (that I built years ago). As far as aesthetics go, he gave me a pretty loose leash. He had a couple of pretty broad requests to work in- some more concrete than others: a sound port(s), armrest, maybe some inlay. Originally I had brought up the idea of doing all American everything, but he likes gotoh 510's (and so do I), so we are keeping this down to woods- which is challenging enough. So here are the specs as of right now: Auditorium shape Osage orage and walnut 3 piece back Bear claw sitka spruce top Walnut neck Walnut binding and armrest Desert ironwood fingerboard and bridge Walnut burl and spalted oak (from his firewood pile) worked in throughout And here are some pictures to get us started: (Cherry for the back strap) Originally I was thinking about doing a one piece neck, but I changed my mind and am now doing a multi-ply neck. The plys are walnut, maple, black dyed poplar, and osage orange Follow along, this ought to be a fun build.
__________________
Chris Ensor Last edited by CaE; 05-08-2017 at 08:19 AM. |
#2
|
||||
|
||||
Great to see this one under way! Chris & I had also talked of him building me a "Pacific Northwest" model, using woods from the Pacific Northwest! This was to be his Concert model, with American Black Walnut back, sides, & neck, with Myrtle trim throughout. Chris was ready & willing, but alas, my pocketbook had some set backs, & the project is put on hold. Chris is very generous with his time & ideas, & I'm still hoping to get the project rolling in the future. I'm excited to see how this "American" model turns out! Some great ideas here!
Steve
__________________
"Naturally torrified, & unnaturally horrified, since 1954" |
#3
|
||||
|
||||
Great looking build Chris and I hope this catches on with more players. There are some really great tone woods right here in the domestic US. We did a similar project for Healdsburg several years ago which we called "Born in the USA".
|
#4
|
|||
|
|||
A few years ago I built a All Michigan guitar. The B&S came from a hard Maple log that buried at the bottom of Lake Arcadia for over 125 years. The top came from a Blue Spruce that was a blow down tree. Bracing for top and back came from the spruce log. The Bridge, head plate, bindings and fingerboard came from a old Walnut tree that was quite figured and very, very hard. For a Maple guitar it had a really good bass response from a Gibson 185 inspired type guitar. I like seeing other woods used for guitar building. In the 80's I built several guitars from Black Locust for side and back's. I used Nutmeg for the tops. The Japanese use Nutmeg wood for Go Boards. Good job Chris. BTW the binding jig works great.
|
#5
|
|||
|
|||
Very interesting premise, Chris.
Besides the obvious "what wood could I use that ISN'T an 'exotic'" I've also wondered which woods lend themselves to which function. I'll be following this one with interest.
__________________
(2006) Larrivee OM-03R, (2009) Martin D-16GT, (1998) Fender Am Std Ash Stratocaster, (2013) McKnight McUke, (1989) Kramer Striker ST600, a couple of DIY builds (2013, 2023) |
#6
|
||||
|
||||
The hardest part, as I understand it, is finding a domestic wood that takes the place of ebony for the fingerboard. Ebony has the perfect hardness, not to mention color, that makes the perfect backdrop for inlay, or plain.
Steve
__________________
"Naturally torrified, & unnaturally horrified, since 1954" |
#7
|
|||
|
|||
ebony substitute
Here are some suggestions to replace ebony: persimmon, hop hornbeam, ironwood, elm, locust.
__________________
The Bard Rocks Fay OM Sinker Redwood/Tiger Myrtle Sexauer L00 Adk/Magnolia For Sale Hatcher Jumbo Bearclaw/"Bacon" Padauk Goodall Jumbo POC/flamed Mahogany Appollonio 12 POC/Myrtle MJ Franks Resonator, all Australian Blackwood Goodman J45 Lutz/fiddleback Mahogany Blackbird "Lucky 13" - carbon fiber '31 National Duolian + many other stringed instruments. |
#8
|
|||
|
|||
OT: Does walnut work for fretboards and bridges?
__________________
(2006) Larrivee OM-03R, (2009) Martin D-16GT, (1998) Fender Am Std Ash Stratocaster, (2013) McKnight McUke, (1989) Kramer Striker ST600, a couple of DIY builds (2013, 2023) |
#9
|
||||
|
||||
Should be an interesting project. Thanks for sharing.
__________________
Life is like a box of chocolates .... |
#10
|
||||
|
||||
A lot of the woods from the mesquite family, Texas Ebony, Desert Ironwood work well for fingerboard and bridges. I have a set of microcurl mesquite that I plan to use for back and sides in an all American build. The T. Ebony and D. Ironwood are dark brown and would be a pretty good background for inlay and I feel confident that they would hold frets nicely.
Nice Job Chris. The osage orange and walnut combination is quite creative. Looking forward to seeing this under finish.
__________________
Kinnaird Guitars |
#11
|
|||
|
|||
Walnut has been used for fingerboards in the past, but it's pretty soft.
I've used persimmon, American hornbeam, and Soft Shell almond for fingerboards. The almond was the hardest. None of these is black, but Tom Thiel, of Northwind Tone Wood, has been dying persimmon black all the way through. Since it's the American member of the ebony family, he calls it 'Ozark Ebony'. The chemistry has been a bit elusive, and it costs about the same as Indian ebony, but works great. Welcome to the 'native woods' builders club Chris! Now we need to get a 'native wood' BUYERS club going! |
#12
|
||||
|
||||
Looks like a really nice set of osage orange. Will be watching.
__________________
Chuck 2012 Carruth 12-fret 000 in Pernambuco and Adi 2010 Poling Sierra in Cuban Mahogany and Lutz 2015 Posch 13-fret 00 in Indian Rosewood and Adi |
#13
|
|||
|
|||
neck wood
Originally I was thinking about doing a one piece neck, but I changed my mind and am now doing a multi-ply neck.
Hi Chris , Is the board , flatsawn 6/4 material? Thanks JJ Last edited by Codfather; 12-16-2016 at 07:04 PM. Reason: .... |
#14
|
|||
|
|||
I would dearly love to stop using tropical exotics for fingerboards and bridges. But where does one source mesquite or persimmon lumber?
Sent from my iPhone using Tapatalk |
#15
|
|||
|
|||
I'm glad you're getting some good results with the jig.
Quote:
Close, It's actually flatsawn 8/4- perfect for multi-ply necks. I have a friend who runs a wood shop and has some persimmon. Sourcing desert ironwood is what I am working on and it's a challenge for sure.
__________________
Chris Ensor |