#16
|
|||
|
|||
Many people are sure there will be no difference when bridge pins are changed. I would not be surprised if the results vary from one guitar to the next, maybe from one person to the next.
I've only changed pins on one of my guitars, my 1967 Martin D-35. This is a guitar I have owned and played for more than 4 decades so I know it very well. I bought a new set of pins for the D-35 and it ended up too bright, so I pulled out the old original plastic pins from 1967 and they mellowed the sound of the guitar considerably. The strings were not changed. In fact, I changed out 3 difference sets of pins after this as an experiment. Two sets were overly bright, the old plastic pins were more mellow and that's what's back in the guitar now. I'm a design engineer with 43 years of experience, so I am used to being honest with myself about what is true and factual and what is not. Of course, maybe I am kidding myself here on the pins for my D-35. - Glenn |
#17
|
|||
|
|||
A good ear is both a blessing and a curse........................come to think of it,a bad ear is also a blessing and a curse....................Some of us are just more blessed then others.
Tom
__________________
A person who has never made a mistake has never made anything |
#18
|
|||
|
|||
I replaced the stock plastic pins on my 2009 D-28 to bone pins. The plastic pins did not fit well and sat too high. The bone pins made a very slight difference in brightness and sustain, and they fit better.
|
#19
|
|||
|
|||
A lot of great comments everyone, I appreciate all of your opinions. My next question will be...Should I or shouldn't I... I might try a set of bone pins.
|
#20
|
|||
|
|||
Bone saddle, Bone Nut, maybe. Pins, if the pins are proper fit to the hole, and the string in seated and tight, should not make any difference.
Dan |
#21
|
|||
|
|||
If the bridge pins weigh nothing, then they'll make no difference.
If they weigh something, they'll make a difference. Whether you can hear the difference depends on both your hearing and the weight of the pins. Try some brass pins and tell me if you can hear the difference.
__________________
gits: good and plenty chops: snickers |
#22
|
|||
|
|||
Try a different pick might make more appreciable difference right away.
I was using the Dunlop 1mm blue Tortex picks which worked well taking the brightness out of a 74 Ovation but didn't work well with my 2012 D-18 because they dulled it down a bit so I switched to the brown Fender heavy picks in the same shape as the Dunlop. The Fender picks sound better on the D-18. |
#23
|
|||
|
|||
I got some pins made from the jawbone of a donkey and when I hit the first chord I slew 40 Philistines.
__________________
Keith Lewis Charlotte, NC rkl245 on the UMGF rkl on Mandolin Cafe Martin D-18VS Martin 000-28EC Kentucky KM-505 Mandolin Fender Leo Deluxe Banjo |
#24
|
|||
|
|||
For a brighter sound use Taylor pins. You'll find them attached to a Taylor guitar.
|
#25
|
||||
|
||||
Quote:
If you like your guitar the way it sounds, you don't need to change them. If you don't like the way your guitar sounds, pins won't likely fix it. Asking if pins change sound is like asking if pick guards change sound. The answer is sometimes...and for lots of reasons.
|
#26
|
|||
|
|||
Quote:
1.) Turn your amp down; and 2.) You're due for a haircut. Wade Hampton "I Can Hear Those Clippers Hummin'...." Miller |
#27
|
|||
|
|||
Quote:
For a brighter sound use Taylor pins. You'll find them attached to a Taylor guitar. Precisely ! Dan |
#28
|
|||
|
|||
I don't believe changing pins will make a noticeable difference.
__________________
Derek 14fret 0 12fret 000 |
#29
|
|||
|
|||
I have always believed that it helps sustain but even after putting ebony and tusq pins in a couple of my guitars I could hear nothing different in the tone.
|
#30
|
|||
|
|||
"I put camel bone pins on my Tacoma Baritone"
I dunno, I've heard camel bone gives a distinct mid hump. |