The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 03-30-2009, 02:12 PM
Boldten Boldten is offline
Registered User
 
Join Date: Jan 2007
Posts: 47
Default Maintaining Ebony fretboard

Hi guys.
I have a Martin Om-21 special, and I'm loving it!
The fretboard is made of Solid Black Ebony and recently I've noticed that there's some slight discolored lines (almost not noticeable). From what I'm aware of, they have always been there. I've tried using the rough side of one of those sponges, but that doesn't seem to help. But lately I've been wondering if it's because it needs some oils or something. Does this seem likely. If so... what should i use for Solid Black Ebony?

Best regards, Michael
Reply With Quote
  #2  
Old 03-30-2009, 02:18 PM
L20A L20A is offline
Registered User
 
Join Date: Sep 2007
Location: Roy Utah
Posts: 7,512
Default

Much of the ebony used these days isn't not pure black ebony.
Some if not most is dyed black.
What you may be seeing is the grain.
If so, there is nothing wrong with it.

Now on a different note,
I use finger board oil on the fret boards, on all my guitars.

Be sure to use the proper oil.
Check with your manufacture to find out what they reccomend for your guitar.
http://www.zzounds.com/item--ROCRTFO
__________________
Happiness Is A New Set Of Strings
L-20A
Reply With Quote
  #3  
Old 03-30-2009, 02:43 PM
mdunn mdunn is offline
Registered User
 
Join Date: Dec 2002
Location: Chicago Suburbs
Posts: 4,151
Default

A couple of times a year (during restringing) buff the frets with 0000 steel wool. Buff in the same direction as the lenghth of the neck (the long way and not across the neck). Cover or stuff a rag in the sound hole to insure that the filings from the steel wool do not enter the body of the guitar. This is especially important if your guitar has an internal pickup.

Then use a very light amount of lemon oil or commercially available finger board oil Use enough to wet the finger board, but do not soak it. With a clean cloth immediatelywipe away the excess. Too much oil over time and you will saturate the finger board.
__________________
1957 Gibson RB-150 5 string banjo. Bought it new & I still have it.
1983 Yairi - Alvarez DY 73
1992 Taylor K-20
1993 Yair - Alvarez DY99A
2001 Yairi-Alvarez DY-91 SOLD!
2002 Taylor Stock 810 Ltd.
2003 Taylor 855e
2003 Taylor 814ce Fall Ltd
2003 Tradition Jerry Reid Sig. Telecaster
200? Esteban American Legacy (New Owner Lake Chautauqua Lutheran Center)
Reply With Quote
  #4  
Old 03-30-2009, 03:22 PM
Jeff M Jeff M is offline
Registered User
 
Join Date: Sep 2000
Location: Not where I thought I was going, but probably where I need to be.
Posts: 18,603
Default

Here is a link to a thread on the same subject from yesterday with links to sites that talk about guitar maintenance/cleaning.;

http://69.41.173.82/forums/showthread.php?t=150468

Bottom line, your fretboard does not need "maintenance", "feeding", oiling, etc..
Wipe it down with a clean cloth after playing and when changing strings.
Maybe once a year a few drops of mineral oil on a clean rag wiped onto and then removed from the fretboard. A light brush over with 0000 steel wool.

You will potentially do more damage to your fretboard with constant applications of oil/cleaners/whatever than if you just leave it alone.
__________________

"Use what talents you possess; the woods would be very silent if no birds sang except those that sang best."
Henry Van Dyke


"It is in the world of slow time that truth and art are found as one"
Norman Maclean,
Reply With Quote
  #5  
Old 03-30-2009, 03:59 PM
RonS RonS is offline
Registered User
 
Join Date: Nov 2008
Location: Drums, PA
Posts: 393
Default

Ebony is way to dense to absorb any type of oil.

Boiled Linseed oil or mineral oil will just sit on the surface and just make your fretboard look shinny and shorten the life of your strings.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools





All times are GMT -6. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=