#1
|
|||
|
|||
Polytune popping noise solved
I am posting this problem and solution in case you run into the same thing.
Problem: My Polytune pedal, which uses true bypass, would make a horrendous popping noise through most PAs when toggling the footswitch. Sounded similar to unplugging a guitar on an unmuted channel. Solution: Put the Polytune in the effect loop of the RedEye preamp I am using. Previously, I was running the tuner in line with the RedEye. (It did not matter whether the tuner or RedEye was first in line, the popping sound happened) This may be common knowledge but I was unable to find the solution on the forum or with guitar store sales people and just took to experimenting. Tim |
#2
|
|||
|
|||
Polytune popping noise solved
I read in the manual to Radial's Vienna Chorus that this is an unfortunate side effect of true bypass switches and circuitry. I also have the Polytune and wouldn't be without it - but I've learned to switch off distortion pedals etc that come after the tuner in the chain as something always seems to get through.
Some pedals offer a choice between true bypass and buffered options. My Flashback x4 is set to buffered mode as I want the fx to decay away naturally and not suddenly when I switch the delay off, this isn't an option with true bypass.
__________________
Gibson ES-335 Studio 2016; Furch OM34sr 2015; Fender MiJ Geddy Lee Jazz bass, 2009; Taylor 414CE 2005; Guild D35 NT 1976; Fender MIM Classic 60s Tele 2008; Fender US Standard Strat 1992; G&L ASAT classic hollowbody 2005; Ibanez RG350MDX 2010(?); Ibanez Musician fretless, 1980s; Seymour Duncan Tube 84-40; Vox AC4TV; Ex-pat Brit in Sweden
|
#3
|
|||
|
|||
My true bypass pedals have a 1Mohm pulldown resistor across the input jack to fight that. The pop comes from the capacitors in the circuit sending a voltage spike into the signal chain. The resistor bleeds the caps down to no voltage, making the switch nearly silent. Your pedal may not have one, or it's loose or has a bad solder joint.
__________________
"You don't have to be great to start, but you have to start to be great." -Zig Ziglar Acoustics 2013 Guild F30 Standard 2012 Yamaha LL16 2007 Seagull S12 1991 Yairi DY 50 Electrics Epiphone Les Paul Standard Fender Am. Standard Telecaster Gibson ES-335 Gibson Firebird |
#4
|
|||
|
|||
I had observed this problem since I've been using the Polytune through the Tuner Out of my previous preamp, but I'd just subscribed it to likely poor insulation/isolation in the pieced-together PA components, including the monitor physically next to my stompboxes, in my regular weekend venue.
Just switched to using the RedEye this past weekend - nice to know that problem may keep its ugly head out of view from now on! |
#5
|
|||
|
|||
Pieter and ClintJ,
Thanks for the input. You taught me something new. I wonder whether the RedEye effect loop has a buffer or pull down resistor. McSheppard, Hope this works for you. I'm curious to know whether you have the same result. Let us know! Tim |
#6
|
|||
|
|||
Yep, got in tons of soundcheck and onstage rehearsal today - in the RedEye effects loop, the PolyTune 2 (and all the other pedals) switch silently in the monitors. Nice!
__________________
Grace and peace, Mike https://soundcloud.com/mcshepherd Axe (acoustic): 2013 Gibson J-45 Standard (w/hardware mods) Pickup: BGM Elevation SBT Preamp/DI: Archangel x7 (generation 7) Tube Amp: Peavey Delta Blues 115 |
#7
|
|||
|
|||
Great! Thanks for letting us know.
|
#8
|
|||
|
|||
posts like this make me love this forum. I was thinking of getting a polytune for a pure acoustic guitar pedal board I'm building. And now I can work around the true bypass switch issue. I want a volume pedal, tuner, (2) Express PARA EQs, compressor, tap tempo delay, and reverb.
|