#1
|
|||
|
|||
Truss rod ?
My Recording King truss rod .I'm pretty sure the nut is 4mm. The Allen wrench I have(all 300 of them) wont go into the head right...
It could be a 5 but I'm thinking 4 mm. Does anyone know what it is for sure,and where I could get one ?
__________________
"234" "In The Wind" |
#2
|
|||
|
|||
I worked on a Washburn once and it took a 3/16" allen wrench. Maybe try one of them, if you can find one.
4mm = 0.15748" 3/16" = 0.1875" 5mm = 0.1968"
__________________
As my username suggests, huge fan of Yamaha products. Own many acoustic-electric models from 2009-present and a couple electric. Lots of PA too. |
#3
|
|||
|
|||
Your best option is gonna be to buy a quality set of both metric and standard wrenches. You can get a combo pack of Bondhus wrenches on Amazon for not a lot. I'm a machinist and these are what I use, they're much more tightly-fit than something you'd buy at WalMart or even Lowes.
__________________
|
#4
|
|||
|
|||
what model of Recording King? I could check what mine is but it might not be what yours is.
|
#5
|
|||
|
|||
Quote:
__________________
"234" "In The Wind" |
#6
|
|||
|
|||
ROH-5 Dirty 30.
__________________
"234" "In The Wind" |
#7
|
|||
|
|||
I have figured out the Truss rod size for the Recording King Roh-05. The size is Allan head,long end,ball arm does not matter.
Size is 5/32 sae. Not metric.......surprise...
__________________
"234" "In The Wind" |