Hi All,
I recently had a Bob Colosi bone-topped LB6 installed in a new Yamaha LL16, along with a Colosi nut and bridge pins. The LB6 install doesn't seem to have gone well and has a gap in the slot on the side of the high-e string that's about an 1/16" and the pickup is woefully out of balance with the high-e being very quiet, the b-string very very loud, and the bass-end kinda muddy.
Baggs told me I'll need to have the pickup re-aligned/centered. Even after that, I suspect their may be some gap in the saddle slot. Is that a tone or intonation concern at all?