View Single Post
  #2  
Old 01-05-2017, 07:10 AM
charles Tauber charles Tauber is offline
Registered User
 
Join Date: Feb 2011
Posts: 8,381
Default

Most bridge designs will accommodate having the bridge pin holes spaced 2 mm further apart, outside hole to outside hole.

The changes to the string spacing at nut and saddle/bridge will alter the neck and fingerboard width. Guitars that I make that are aimed at fingerstyle - or any more complex music - have a little more clearance from the high E string to the edge of the fingerboard as well as having a little more clearance at the 12th fret on the same string.

Otherwise, no changes as a result of wider string spacing.

Last edited by charles Tauber; 01-05-2017 at 07:16 AM.
Reply With Quote