Speaker cord isn't susceptible to RF noise, the circuit impedance is too low for it to be an issue. If it were, an idle cab would play AM radio with nothing plugged into it.
There's a legion of amps wired with lamp cord out there. Just make sure the connections at the jack and speaker are well connected and soldered. An open connection there can wreck a tube amp.
__________________
"You don't have to be great to start, but you have to start to be great." -Zig Ziglar
Acoustics
2013 Guild F30 Standard
2012 Yamaha LL16
2007 Seagull S12
1991 Yairi DY 50
Electrics
Epiphone Les Paul Standard
Fender Am. Standard Telecaster
Gibson ES-335
Gibson Firebird
|