Quote:
Originally Posted by Bob Womack
Two questions:
1. Does the E-V mic require P48 phantom? If so, you are going to need a source.
2. Do you know whether the case of the mic supplied any form of an acoustic phase shift that was used in the pattern?
Have fun!
Bob
|
Hi, Bob,
Yes, the mic requires power, but, it can run on 12V. The spec says 12-52VDC, and the EV people confirmed it can run on 9V battery or the power provided by Highlander preamp.
As for the phase shift, I am not sure. I just removed the casing, and there was no wiring attached to the case.
I am trying to understand how I can attach the three wires to the stereo endpin jack which seems to have only 2 available attachments. I found out that AKG C416 has the similar configuration, so it must be possible.
Ted