View Single Post
  #8  
Old 07-31-2016, 05:35 AM
nhbiker1961 nhbiker1961 is offline
Registered User
 
Join Date: May 2016
Posts: 218
Default

Quote:
Originally Posted by Nick84 View Post
So when you use the amp as a monitor do you just get your guitar coming through the amp with no vocals?

I want my full mix to come through the monitor, guitar and vocal. My concern with the Fishman is if I run my vocal and guitar through it then DI out to the PA my guitar will sound great but my vocals not so great?
I only run the guitar through the amp. I am running a powered 8 channel mixer with great effects and equalization for the vocals. As far as the channel that I run the DI from the fishman to the pa, That is set to flat with no effects. All my effects on the guitar are coming from amp or my pedalboard. We have a seperate floor monitor for vocals. But you can run your vocals through the Fishman amp. It's 2 channels with seperate effects and volume, so you can control the mix. But personally I do not want vocals coming through my guitar amp at gigs. Sitting in my living room is fine.

Reply With Quote