[CabinetMan]

Well I've gotten a little more done the last couple days.
Laid out the Neck block then got it cut out.

20170807_192554 by Cabinet Man, on Flickr
20170807_200247 by Cabinet Man, on Flickr

Decided to go with a Laminated Cherry neck. Started with the rough lumber then Jointed , Planed and Glued up the laminations.

Once Dry, I Jointed and Squared it up. Made all the necessary measurements and marked off an outline of all the cuts to be made on the stock. I decided to go ahead and cut the tenon on the neck before gluing in the neck block to get a precise fit. I did allow for the thickness of the side wood.
The neck is now rough cut.
20170809_130655 by Cabinet Man, on Flickr20170809_132800 by Cabinet Man, on Flickr
20170809_134322 by Cabinet Man, on Flickr
20170810_080223 by Cabinet Man, on Flickr
20170810_123032 by Cabinet Man, on Flickr
20170810_153708 by Cabinet Man, on Flickr
20170810_162150 by Cabinet Man, on Flickr
20170810_164138 by Cabinet Man, on Flickr
20170810_164551 by Cabinet Man, on Flickr
20170810_171040 by Cabinet Man, on Flickr