Another note for Mugig owners.
I decided I didn't want the "Mugig" logo on the front speaker grill of my amp and wanted a simple, clean look.
I thought it was attached by simple adhesive but soon learned the logo was much more substantial than I thought.
You need to take the grill off--only two screws.
The logo itself is actually made of cast aluminum! It has two prongs on the backside that they insert into the grill and then bend over to secure. In addition, there is a thin strip of strong rubbery adhesive that's been applied.
I unbent the prongs, then I used an old credit card to slide in and wiggle back and forth until all the adhesive was loose, then removed the logo. The remaining adhesive came off with a bit extra work and the grill is perfect now and clean.
Just a fun, quick project. I can always reattach the logo if I choose to do it some day.
The surprise was that it was cast aluminum. I thought it was just plastic with a peel and stick backing.
|