There's wayyyyyyyyyyyyyyyy too much creedance put to "barebones/incomplete specs" here.
How can anybody seriously state for example, that any of the K Series speakers have 1000/w .??? I sometimes get the feeling that folks just want to be suckered into believing those numbers. Ridiculous. All I see here, is "speculation", not "specifications". Who on this forum, can tell me where the limit-protection circuits are set on any of the K Series speakers?
Frequency specs,,,,,,,, at what amplitude????? How often are you going to see a spec that includes amplitude level, and accompanied by a distortion spec? With high-end gear, specs stated like Example 6 (below), are commonplace. Examples 1-5 might more accurately reflect consumer-level gear. My point is; you "CAN NOT" tell by specs alone, how one speaker will compare to another, unless it's a "complete" spec, from a trusted source.
Example 1; 45Hz- 18kHz
Example 2; 45Hz- 18kHz (+/-3dB)
Example 3; 45Hz- 18kHz (+/-3dB) @ 1 watt
Example 4; 45Hz- 18kHz (+/-3dB) @1 watt/1% harmonic distortion
Example 5; 45Hz- 18kHz (+/-10dB)@ 100watt/10% harmonic distortion
Example 6; 45Hz- 18kHz (+/-3dB) @100dB SPL@ 10meters 1/2 space/0.5% hd
Bob
|