Quote:
Originally Posted by murrmac123
Roger, you don't need clamps to join the top (or the back for that matter).
Just match the two sides , s t r e t c h several pieces of masking tape across the joint then fold the sides back and apply the glue. Close when the glue has been applied and the masking tape will supply all the clamping pressure you need. You do need to weight the top down flat when doing this of course.
|
Thanks--the clamps are just holding boards on top of the joint to keep the plates flat. I'm clamp deprived.
I do like the tape trick--will try with the top!