[Schau_ins_Regal]

Hi,

I have a question to the electronics guys here.

Let´s say I have a K&K PWM and a Schertler Jam 100.

The K&K wants to see 1mOhm input impendance but the Schertler high-z inputs have 47kOhm.

What I read here several times is that many people just solder a 1mOhm resistor into the guitar cable from tip to ground.

I think in this case it wouldn´t change anything because the two resistors are now parallel which means the resulting resistance will be less than 47kOhm.

I think that 1mOhm should just be soldered to the lead of the jack but not to ground so that a series connection of the resistors is established.

Am I right or am I not seeing something here?