Quote:
Originally Posted by Mortimor
My ABT610ESHB came with a bit of a backbow. After some truss rod adjustments to get rid of most of the buzz, the twelfth fret action is just below 2.5mm on the bass side and just above 2mm on the treble side.
I have it tuned B to B and there is still a bit of fret buzz on the 9th fret of the low B string. I used a credit card as a fret rocker and the frets seem level with each other in that area, so it appears the baritone needs either higher action or a bit more neck relief than I normally use.
|
If you tune 'C' to 'C' does that slight buzz disappear?
__________________
Brucebubs
1972 - Takamine D-70
2014 - Alvarez ABT60 Baritone
2015 - Kittis RBJ-195 Jumbo
2012 - Dan Dubowski#61
2018 - Rickenbacker 4003 Fireglo
2020 - Gibson Custom Shop Historic 1957 SJ-200
2021 - Epiphone 'IBG' Hummingbird
|