Don't over think it. Just a little glue and a toothpick. Clean the hole a little with a very small drill bit using it by hand. Snip the small tip off the toothpick then coat the toothpick with glue and press it in there. Give it overnight to dry, then pre drill a tiny hole by hand again and install screw. You can even add a drop of glue onto the screw.
__________________
Seagull Entourage Rustic Cutaway
Yamaha FG410A
Fender DG-14S/12 TF
Ibanez GSR200 Bass
Abilene Hot Rod Bass (found parts in trash can an resurrected)
Peavey TKO Bass Amp
Cordoba Concert Ukulele
A few more things that I'll add soon
|