View Single Post
  #3  
Old 07-02-2012, 04:40 PM
Xtremca Xtremca is offline
Registered User
 
Join Date: May 2011
Location: Iowa
Posts: 1,259
Default

Quote:
Originally Posted by ohiopicker View Post
Hi:

What is the impedance of the mic you bought to replace the inexpensive mic? Did it come with a cable? If so, what kind? (xlr to quarter inch jack or xlt to xlr)? Are you able to try the mic and xlr cable in another amp for comparison?
The mic is a EV cobalt 9. Not sure what the mic imped is off hand. The mic is xlr out. Cable is xlr both ends. Just to rule out the mic and cable, I went over to GC and test both together there an all worked good. The one site I found with a similar problem mentioned trying the xlr/trs adapter as the mic input is a combo jack. That seems to work as it should. I can't say I know much about these type of jacks or how they are wired. My first thoughts are things should be common on the inside. I'm wondering if there could be a bad connection on the xlr side of the jack. May just have to bite the bullet and order a service manual off eBay.
Reply With Quote