Quote:
Originally Posted by bausin
>> I would appreciate any comment on the method I used to arrive at the two radiuses.
Murray,
To calculate the radius at the bridge, you will need to know the string spacings at the nut and bridge, the radius at the nut, and the scale length. The width of the fretboard is irrelevant.
To calculate the radius at the end of the neck, you will also need to know the distance from the nut to the end of the neck.
If you post those numbers, I can calculate the radii for you.
Steve
|
You only need know the radius at nut and 12th fret, nothing else. Whatever the difference in radius between 12th fre and nut should be the difference between bridge and 12th fret.
A fretboard with constant center and edge thickness cannot be a conical section...