Crow spacing doesn't do much for clawhammer since all the action is happening normally around the rim / neck heel juncture.
I make all my bridges 1-7/8" spacing and it's noticeable, but not by a lot. Noticeable when compared to a 1-3/4" spaced bridge, though.
Make your own, or if that's not possible purchase a couple of the cheap ebony topped bridges the next height up from what you use. It's easy enough to sand down the top edge and carve in 5 notches to see if you can tell the difference in the spacing feel. If you like it then just purchase a bridge made by someone who you are familiar with.
|