View Single Post
  #13  
Old 12-21-2017, 01:35 PM
Hill Guitar CO Hill Guitar CO is offline
Registered User
 
Join Date: Dec 2010
Posts: 7
Default ESTUDIO CUTAWAY FINGERSTYLE

I've just returned to this forum, and will begin to pick up pieces of threads from long ago.

Imported New World Estudio models include 650mm [~25 5/8"] string length Cutaway w. 52mm nut and Fingerstyle w. 48mm nut; 2 3/8" string spacing at the saddle. Includes gigbag.

New World Player models include 650mm string length Cutaway w 52mm nut and 640mm string length Fingerstyle w. 48mm nut radiused fingerboard; 2 3/8" string spacing at the saddle. Includes arched hardshell case.

Guitars are sold stock without pickup. We now install Barbera soloist pickup. These guitars are stock and other than the pickup.

Domestic Hill models are more customize-able as you can see from these
photos of custom guitars - #1. Stage BZ rosewood, 3/4 body [18" length, 13" lower bout, 3.25" depth] 1 7/8" nut radiused fingerboard, spruce/nomex/cedar double top. lattice braced, sound port, Barbera Soloist pickup, compensated nut, 12 hole bridge.




#2 Full size Macassar Ebony Crossover w. stand up ergonomic body; otherwise specs are the same as above.


We are a classical builder. In addressing the needs and desires of certain classical and fingerstyle players, we have tried to find the most representative non coloring pickup, which is the Barbera. http://www.barberatransducers.com/guitar_pickups.html Consistent with our desire to have the instrument sound amplified like it does acoustically, we've been happy with this.

From that, from time to time we have been asked to make a nylon string Crossover model and a thinner smaller bodied Stage model reducing feedback. The Barbera transducer itself being the saddle w/o microphone is very feedback resistant to start with. And, we've found the pickup material to resemble bone making the saddle replacement transparent when the instrument is played acoustically.

2018 will see both of these models lining up as standard offerings in our catalog - Indian rosewood is the standard back and side wood with spruce or cedar lattice braced double tops as a choice. Many other woods are available for back and sides. Built to order.

LD

Last edited by Hill Guitar CO; 12-21-2017 at 01:40 PM.
Reply With Quote