Pics?
If it is a Taylor with the UV cured finish (not sure it makes a difference), I've used super glue (CA glue) to fill and level ding. There's an how-to I used but don't recall where I found it; maybe Stewmac. The thing about the final finishing is you need some very fine sandpaper. I think I started with 800 and finished with 2000 or 4000. If you must DIY, research first.
__________________
Martin 000-28EC, Taylor 12fret Cedar/Mahogany, Taylor GC8, Carvin AC275,
Takamine TC135SC, Yamaha APX5na
|