View Single Post
  #20  
Old 08-13-2020, 12:02 PM
Portland Guitar Portland Guitar is offline
Registered User
 
Join Date: Jan 2019
Location: Portland , Oregon
Posts: 95
Default

The end of the track is ahead for the cedar topped parlor. It’s time to lay the finish down. Every time this is done it gets a little bitter. There are a lot of variables to control while finishing so every piece of experience goes far.


The finish is sprayed on. The first layers are thick to fill in the pores and texture of the wood.



The body is left to dry.



It’s sanded down then re-sprayed with a thin coat, this is done many times



The lacquer cures overnight. I call this the lollipop phase



The neck is also sprayed. Here is some cleanup done on the neck



The body is polished and buffed



The bridge is created and sanded



The bridge is glued on



The frets are leveled and dressed



A beautiful looking back



This guitar is finished after a few detail work. Close enough to put on the strings and take some pictures!
Reply With Quote