The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Custom Shop (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=38)
-   -   Incoming 2017 Tippin Al Petteway Crescendo (https://www.acousticguitarforum.com/forums/showthread.php?t=485707)

pheumiller 10-11-2017 08:48 AM

Incoming 2017 Tippin Al Petteway Crescendo
 
Paint us pink with excitement: we've got another Al Petteway signature model on the way from one of our all-time favorite builders, Bill Tippin! As you know, Al's left his mark on virtually every steel string demo we've ever recorded, but this special Crescendo actually bears his physical mark on its own special label below Bill's. We supplied the Brazilian Rosewood for the back and sides (it was a great excuse to sift through our secret stash and dream of future builds), and Bill supplied the rest. We'll document the build process throughout the various stages, so stay tuned for updates! See immediately below for a link to another Al Petteway signature model Bill built for us in the past.

https://www.dreamguitars.com/shop/ti...-petteway.html

Back and sides – DG’s personal Brazilian Rosewood
Top – Swiss Moonspruce
Scale length – 25.5”
Lower bout – 15 1/2”
Body length – 20 3/8”
Body Depth – 4 5/16”
Standard nut width – 1 3/4”

https://www.dreamguitars.com/wp-cont...e-988x1024.jpg
Side assembly in the Crescendo mold clamped to a bench.

https://www.dreamguitars.com/wp-cont...r-1024x768.jpg
Close up of Tippin's spreaders which keep the sides firmly squared up agains the inner rim of the mold.

https://www.dreamguitars.com/wp-cont...p-768x1024.jpg
Gluing the back to the side assembly: 30 clamps.

https://www.dreamguitars.com/wp-cont...g-768x1024.jpg
Binding strips, dark Brazilian Rosewood against even darker Brazilian Rosewood.

https://www.dreamguitars.com/wp-cont...t-768x1024.jpg
Bill's spliced some textured sapwood between Abalone strips for an endgraft with an organic flair.

https://www.dreamguitars.com/wp-cont.../soundport.jpg
Bill's iconic soundport, beveled to reveal the reinforcement layers underneath.

https://www.dreamguitars.com/wp-cont...l-1024x768.jpg
A Ryan-style arm bevel has here been routed to receive bindings. Installing a bevel is an intense feat of engineering, one which Bill has mastered handsomely over the years. Bill sourced this fine example of Moonspruce from Switzerland.

10/11/2017 Update:

https://www.dreamguitars.com/wp-cont...rs9-178web.jpg

https://www.dreamguitars.com/wp-cont...res-1-9-17.jpg

https://www.dreamguitars.com/wp-cont...-9-17-2web.jpg

https://www.dreamguitars.com/wp-cont...-9-17-7web.jpg
From Bill: "The heel to body joint has been beveled back to allow more access to the extension frets (upper register) also the heel profile has been swept in some providing no edges to interfere with access in the cutaway."

https://www.dreamguitars.com/wp-cont...s-9-174web.jpg
Koa arm bevel to match the other Koa appointments

https://www.dreamguitars.com/wp-cont...es9-176web.jpg

https://www.dreamguitars.com/wp-cont...es9-179web.jpg
Fossil Walrus tusk surrounded by Mother of Pearl sparkle, Blue-Green Paua trim

Rwpierce 10-11-2017 01:36 PM

Wow, that's going to be a beautifully amazing guitar!!

Monk 10-12-2017 07:59 AM

Yowzah!
 
Eye-candy and sonic alchemy, too.

Nemoman 10-12-2017 09:39 AM

Unique take on the arm bevel with the use of different woods for the bevel and the binding.

Very nice!

Diamondave 10-12-2017 05:36 PM

Looking tasty...!


All times are GMT -6. The time now is 09:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=