Proper mike for AER Compact 60
Hi:
For the first time I'm going to be doing a performance in a small venue where I'll have to use my AER Compact with a mike. Can anyone recommend to me the proper mike, cord, and mike stand that I'll need for this? And incidentally, what is the best placement for the amp: e.g., to the rear of me and to the left? Thanks and Happy Thanksgiving to fellow AGF'ers. |
Use the line out in the back of the amp instead of a mic, that will save you and the soundman lots of trouble.
If you don't have a monitor on stage, put the amp where you can hear it. |
I used the Compact 60 (sometimes two) as a little PA to mic my guitar at gigs and weddings, etc, for a while. It does a good job, though it’s low (I think 15V) phantom power limits mic choice quite a bit. I think I used the inexpensive little AT Pro 37 condenser mic with that rig.
I would shoot for keeping the amp fairly close at your side so you can reach over and tweak, with the speaker being about parallel with the mic. That’ll have you slightly behind the amp, which in a small quiet-ish room should allow you to hear yourself very well. You can move back or forth a little bit to find a better fit. The AER also mounts on mic stands which makes for another good option. I’ve also use an Audix i5 mic for my guitar, but on the whole I don't like to use a dynamic mic on my guitar.:) |
Thanks, fellows, but I guess I didn't make myself clear--I'll be singing also. I'll have my guitar-a Rainsong Om-1000 plugged into the AER. So the mic I'm referring to will be a vocal mike, not one for an instrument.
|
Quote:
I am getting the most beautiful tone out of my small OM using a highlander PAMDI in conjunction with Wavelength/internal mic combo. I agree with Teleplucker. Use the line out if you want all the effects out to the board. If you want to send a clean balanced signal, use the XLR. Mic'ing AER will not only be pain, but won't give you the best sound. |
Hi Philly5834 - when I do guitar/vocal stuff through my AER Alpha, I use a boom mic stand with a very ordinary Shure SM58 plugged via XLR lead into the XLR input on the amp for the vocal, and the guitar plugged into the instrument channel with jack lead. I usually mount the amp on a boom stand with the boom removed, and have the amp a couple of feet to my right and slightly in front of me, roughly waist height or slightly higher. If it's a very quiet venue, it works really well with the amp four feet or so directly in front of me at about waist height, and then use just one mic (I use an ATM 33a into the XLR channel) to pick up voice and guitar - gives a very natural sound in the right venue.
Hope this is helpful, Keith |
Can't go wrong with a SM58 or Beta 58
|
Thanks a lot , everybody, now it's quite clear to me what I have to do. All of your answers were helpful, but Keith's seemed to hit the nail on the head. Appreciate it a lot. Have a good and restful weekend! Best,
Philly |
Quote:
|
All times are GMT -6. The time now is 11:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum