The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Acoustic Amplification (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=16)
-   -   AER Compact 60 STAND: HELP? (https://www.acousticguitarforum.com/forums/showthread.php?t=164445)

FingerCraft 09-22-2009 07:05 AM

AER Compact 60 STAND: HELP?
 
Does anyone have a safe sturdy solution for raising the AER Compact 60 up high?
I love my Compact 60, It sounds great, but the way it is rigged for putting it up high is a 3/8" fitting in the bottom for a 5/8" adaptor that a standard mike stand screws into.
I used a regular mike stand with a round weighted bottom, and the whole thing was a delicately balanced disaster waiting to happen. I could just see someone bumping it, knocking it over, braking the stand off and smashing the amp; or, worse case, hitting someont in the head!
Help! Has anyone found a better way to get it up high? I am both bothered by how small the screw in plate in the bottom of the amp is, and how unsteady the stand itself is. Thanks.

ocarolan 09-22-2009 08:15 AM

I use a tripod base mic stand with my AER Alpha at around waist height with no problem. The amp screw plate is well up to the task, but your mic stand round base has too small a "footprint" for stability I think. I do get some wobble if I want the amp higher, as I then have to extend the upper section of the mic stand, and that is a bit wobbly by the time I get the amp to shoulder height.

Some people have had success with camera tripods I believe, but I have no personal experience of that.

Keith

ljguitar 09-22-2009 03:11 PM

Hi FC...
I use a small X-stand when I sit and a taller one when I stand to bring my amps to shoulder level or just below.

My tall stand't top rails sit about 48'' above the floor, and my short one about 36''. The shorter one is pictured below...

http://farm4.static.flickr.com/3075/...519c1f96ff.jpg

These have proven durable and stable...which are good things with stands. I've never had one even close to being knocked over...

They fold pretty flat and go in the trunk easily...



FingerCraft 09-22-2009 06:26 PM

Quote:

Originally Posted by ljguitar (Post 1966977)
Hi FC...
I use a small X-stand when I sit and a taller one when I stand to bring my amps to shoulder level or just below.

My tall stand't top rails sit about 48'' above the floor, and my short one about 36''. The shorter one is pictured below...

http://farm4.static.flickr.com/3075/...519c1f96ff.jpg

These have proven durable and stable...which are good things with stands. I've never had one even close to being knocked over...

They fold pretty flat and go in the trunk easily...



Where did you get the taller one and about how heavy and large is it folded?

8daypsalmist 09-22-2009 07:41 PM

I also have a Compact 60 - where would I get the adaptor to mount it on a mic stand?

FingerCraft 09-23-2009 08:38 PM

Quote:

Originally Posted by 8daypsalmist (Post 1967215)
I also have a Compact 60 - where would I get the adaptor to mount it on a mic stand?

From AER. It came with my amp. There is a tapped hole in a small plate in the middle of the bottom of the amp that it screws in to.

I've been looking in to another way to put my amp on a stand because the mike stand method is pretty wobbly.
"Ultimate Support" makes a speaker mounting bracket sold by Planet DJ. It fits on the top of a 1 1/2" tubing speaker tripod. GC sells the tripods that extend to about 6 feet tall. I've ordered the mounting bracket, and plan to make a platform, either aluminum or wood to attach to the bracket and then my amp. I haven't decided exactly how till I see it all, but the mounting bracket has several mounting holes. I figure the only sturdy place on the amp is the original tapped piece of metal, because the rest of the amp is some other material that AER did not use to screw into. I also figure that the combination of screwing into the amp and having the amp rest on a platform should be more sturdy especially with a 1 1/2" tubing tripod. I picture it somewhat like a camera on a tripod screw mount.
Anyone with ideas too?

FingerCraft 09-23-2009 08:42 PM

Quote:

Originally Posted by ocarolan (Post 1966558)
I use a tripod base mic stand with my AER Alpha at around waist height with no problem. The amp screw plate is well up to the task, but your mic stand round base has too small a "footprint" for stability I think. I do get some wobble if I want the amp higher, as I then have to extend the upper section of the mic stand, and that is a bit wobbly by the time I get the amp to shoulder height.

Some people have had success with camera tripods I believe, but I have no personal experience of that.

Keith

I'm using the amp where I am not on a stage, and want the amp to be high so the sound is not absorbed by the audience, but goes over them. Usually about 200 to 300 people. So I'd like it to be about 6' high.

taropatch 09-23-2009 10:36 PM

Quote:

Originally Posted by 8daypsalmist (Post 1967215)
I also have a Compact 60 - where would I get the adaptor to mount it on a mic stand?

I got mine from:
Coyner Musical Instruments
25752 Encanto
Laguna Hills, CA- 92653
Phone: +1 (949) 831 - 7322
Fax: +1 (949) 831 - 3851
fcoyner [at] earthlink.net

8daypsalmist 09-23-2009 11:17 PM

Thanks Andy!

ljguitar 09-24-2009 12:14 AM

Quote:

Originally Posted by FingerCraft (Post 1967145)
Where did you get the taller one and about how heavy and large is it folded?

Hi FC...
It folds fairly flat and it is about 4 feet long when folded. Got it at Musician's Friend for about $15

Hope this helps...



All times are GMT -6. The time now is 03:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=