PDA

View Full Version : Marshall G50CD-R


A7XforLife
06-08-2006, 10:03 PM
Hello everyone..im new here, but i expect to be a reg..

About a year or so ago, i bought a Marshall G50CD-R from my friends brother..and i knew the input jack was messed up... i know i can fix it, i just have a problem..i cant find an input jack that would work...i have several 6 prong ones, but the pin cofiguration is different..

http://i7.photobucket.com/albums/y274/Suburban_LifeKMK/InputJPG.jpg and i need something like this (example) http://i7.photobucket.com/albums/y274/Suburban_LifeKMK/InputJPGexample.jpg


so i need to know what pin from the left input jack corresponds to the one on the right. I know theres 3 hots, 2 grounds, and one Misc.

and treat each as if it were laying on its back...

thank you

A7XforLife
06-09-2006, 01:48 PM
Gee...thanks for the help...

Devin
06-09-2006, 03:31 PM
Looks like maybe you are a bit miffed that someone did not answer your question quick enough...

Well, I cannot answer your question either, but I can welcome you to the Acoustic Guitar Forum. So - welcome. Hope you find the information you are looking for soon. If not here, then somewhere else.

BTW - I assume that a Mashall G50CD-R is an amp of some type... And I assume that that input jack that you have mentioned and displayed is not an imput jack for a 1/4 instrument cable. Other than that, I can assume no more... Sorry, I am not familiar with your amp, or that kind of jack interface. Looks like a catagory 5 network cable to me. :)

There very may well be someone around here that can help. Check back soon.

Good luck,

- Devin

PS: On second glance those pictures look like gun range body targets. I think you should concentrate on your front site and work on your trigger control. Your groups should tighten up with a bit more practice. :D

A7XforLife
06-09-2006, 03:44 PM
well, atleast SOMEONE here has the decency to reply...i guess its kinda hard to explain what i want over the internet...but ive been searching forever...but thank you, and yes, they do look like targets now that you mention it....:D

Devin
06-09-2006, 04:10 PM
I know tha this might sound simplistic, but have you tried to get the information or parts you need from the source? From Marshall?

- Devin

A7XforLife
06-09-2006, 11:42 PM
ya ive been looking all over the place...nothing,...

RickC
06-10-2006, 05:54 AM
Hey Welcome to the forum!


Sorry you're not getting much help here

Seems to me that if these guys cant help you then no one can Check it out

http://www.marshallampforum.com/forum/